PMA's ETO Process Indicator Label will change color from purple to green when expose to sufficient ethylene oxide at a concentration of 600+/- 30mg/l and 60+/- 10% RH at 30°C.  The indicator ink will change color from purple to green and might defer depending on the purity of the ETO gas after a time period  (>5 minutes as specified by EN-867).  PMA's ETO Sterilization process indicators meet the performance specification in ISO11140-1 "Sterilization of Health Care Products - Chemical Indicators - Part 1: General Requirements", Section 6 for Class 1 Process Indicators.

Product Details

• Compliance with RoHS (2002/95/EC) directive requirement

• Non-toxic, lead free water based ink

• Compliance with ISO1114-1 Class 1 Process Indicator general requirement

• Available in removable and permanent adhesive

• Thermal Transfer Printable

• Custom design to customers' requirement

• Each batch is independently validated in a recognized ETO plant

PMA's Gamma / E-beam process indicators are designed to use as process indicator (Class 1) for Gamma / E-beam sterilization operating at 5kGy with increased color density up to 100kGy of Cobalt-60 irradiation.  The indicator ink will change color from orange to red to distinguish Gamma / E-beam exposed products from non exposed products. PMA's Gamma / E-beam process indicators meet the performance specification in ISO1114-1 "Sterilization of Health Care Products - Chemical Indicators - Part 1: General Requirements", Section 6 for Class 1 Process Indicators.

Product Details

• Compliance with RoHS (2002/95/EC) directive requirement

• Non-toxic, lead free water based ink

• Compliance with ISO1114-1 Class 1 Process Indicator general requirement

• Available in removable and permanent adhesive

• Thermal Transfer Printable

• Custom design to customers' requirement

• Each batch is independently validated in a recognized Gamma plant

PMA's steam sterilization process indicators designed to use as a process indicator for dry steam and subjected for 10 mins at 121 C (250 F) / 1 bar or 3 mins at 134 C (272 F) / 2 bar.  The indicator ink will change color from red to black to distinguish steam exposed products from non exposed products.  PMA steam sterilization indicators meet the performance specification in ISO1114-1 "Sterilization of Health Care Products - Chemical Indicators - Part 1: General Requirements", Section 6 for Class 1 Process Indicators.

Product Details

• Compliance with RoHS (2002/95/EC) directive requirement

• Non-toxic, lead free water based ink

• Compliance with ISO1114-1 Class 1 Process Indicator general requirement

• Available in permanent adhesive

• Thermal Transfer Printable

• Custom design to customers' requirement

• Each batch is validated in-house

PMA's blood bag label is designed for the application as secondary blood bag label which is applied over the primary label after the bags have been filled with blood - the blood is tested and the result printed on the label.  Label must withstand cryogenic temperatures as well as centrifugation forces.
 

Product Details

• Designed for extreme temperature usage

• Good printing features

As the pharmaceutical and healthcare packaging industry continues to be revolutionized by technology, patient care standards and changing global healthcare system, pharmaceutical labels are playing an important in operational efficiency, security and compliance.  PMA's pharmaceutical labeling solutions provide converters with the support needed to create, secure/ track label products, drug-delivery device labels and functional labeling components.

Product Details

• Shorter time to market with use of pre-tested components

• Adhesive technologies including hot melt, solvent and emulsion

PMAL7028 comprises a top layer white woodfree coated with a satin finish having high opacity and excellent smoothness for high quality label which require brilliant multicolor print. The permanent adhesive layer comprises a permanent acrylic dispersion adhesive. The label is printable by all conventional printing process,
suitable for foil stamping, varnishing and thermal transfer.